|
【金屬探測器詳細說明】
品名:食品金屬探測器
產地:上海
型號:BH-SP
應用特性檢測產品:塊狀產品(包括已包裝的產品,如包裝后的散料)
安裝于:傳送帶流水線
使用行業:食品行業、化學行業、醫藥行業、紡織行業、包裝行業、其他行業
BH-SP食品金屬探測器特性:新型線圈技術(非金屬區更小),因此輸送機機身更短小,最大承重為5kg。
全鏡面不銹鋼結構,確保機器的檢測穩定,性能良好,使用壽命長;滿足食品行業的衛生要求,拆卸簡單,方便清洗;
可自動學習并補償產品效應。
檢測產品效應大或特殊包裝的物品時,可選低頻處理技術。
滿足IFS及HACCP認證要求.
金屬探測器系統組成:
檢測系統:雙通道金屬探測圈 ,長方形口徑(不可分的)
控制系統:ADLINE微處理控制器
傳 送 機:全焊接,高強度不銹鋼結構,聯體式PU(聚氨酯) 輸送帶
驅 動:90W電機、減速箱集成化
BH-SP金屬探測器典型應用:包裝后檢測--出廠前的最后金屬檢測、 稱重時檢測、 貼標簽時檢測
金屬探測器技術參數:
設備長度:1000mm 輸送帶離地高度:680mm
有效檢測通道 (寬度/高度):250、300、400/100、120、150±25
檢測精度:Φ鐵球/Φ不銹鋼 :0.7、1.0、1.2/1.5、2.0、2.3
以上靈敏度為空機無環境干擾條件下測得,金屬探測器實際使用會因產品成分干擾和使用環境的不同略有差異。
Food Metal detectors:
Application features detection products: block products (including packaging products, such as packaging of bulk materials)
Installed in: belt line
Food industry, chemical industry, pharmaceutical industry, textile industry, packaging industry, other industries.
OMD-A-M Metal detectors can detect the iron impurities from the products with aluminum foil or metallized packaged .With the new technology of detection coil,the detector can make the whole system more smaller In the case of detection accuracy is not affected . Short body is also convenient for the existing transmission system to integrated with.
With the new technology of new coil (it will be more smaller in the Non-metallic area) , the conveyor body is more smaller.
The maximum load is 5-30kg.
The stainless steel structure with full mirror can ensure the stability of the machine detect, good performance and long life for use.
It is also satisfied with the requirements of food industry hygiene for easily removed and cleaned.
It can selectable low-frequency processing technology when detect the product with large effects or special packaging.
Meet the requirements of IFS and HACCP certification.
Dual-channel metal detection coil with rectangular aperture (no points)
Control system: ADLINE microprocessor controller
Conveyors: Joint-body PU (polyurethane) conveyor belt with all welded, high strength stainless steel structure
Drive: 90W motor, gear box integration
Detect the products before them leave the factory: The final metal detection(After packing, when weighing, when labeling)
Device Length: 1000mm Ground Clearance belt: 680mm
Effective detection channel (width / height): 250,300,400 / 100,120,150 ± 25
Detection accuracy: Φ ball / Φ stainless steel: 0.7,1.0,1.2 / 1.5,2.0,2.3